The Enebro Velcro Black S2 Shoe is the perfect safety footwear for industry, warehouses, outdoor work and construction. The double-density polyurethane sole offers resistance to impacts and wear , while the velcro closure system guarantees a quick and secure fit.
In addition, its design allows natural perspiration of the foot and has sweat-absorbent linings. Meets the requirements for protection and resistance to risks and environmental factors.
It is resistant to hydrocarbons, slipping, absorption and penetration of water.
Characteristics of the ENEBRO VELCRO BLACK S2 safety shoe
- Manufacturing system by direct injection to the cut.
- Ergonomics and adjustment to the user's morphology.
- Impact resistance (200 joules).
- Antistatic Footwear.
- Energy absorption in the heel.
- Resistance to hydrocarbons, slipping, absorption and water penetration.
- Cold insulation.
- Resistance to non-extreme environmental factors, under foreseeable conditions of use.
- Adjustment system.
- Complies with EN ISO 20345:2011.
- Directive 89/686/CE.
- EU Regulation 2016/425.
Description of components
- Black cowhide grain leather with a thickness of 2.0 – 2.2mm.
- Tear strength: > 120 N.
- Tensile strength: > 20 N/mm2.
- Water vapor permeability: > 0.8mg/cm2h.
- Cr VI content: < 3ppm.
- pH: > 3.2.
- Water absorption: < 20% after 60 minutes.
- Step and penetration: < 0.2 gr in 60 minutes.
- Lining: Upper and Heel: in anti-allergic polyamide-based material, with great resistance to abrasion, absorption and drying of perspiration.
- Tear resistance: > 18 N.
- Abrasion resistance: > 51,200 dry and 25,600 wet cycles.
- Water vapor permeability: > 2mg/cm2h.
- Langue : Extension du cou-de-pied.
- Col rembourré avec mousse intérieure.
- Contrefort en tissu non tissé imprégné de résines.
- Semelle intérieure en mousse avec support textile, conception ergonomique selon les schémas de démarche biomécaniques.
- Semelle intercalaire en polyuréthane expansé antistatique à faible densité avec une grande capacité d'amortissement. Fournit une isolation thermique.
- Semelle compacte en polyuréthane antistatique, haute densité, conception biomécanique et antidérapante, avec patins anti-roulis (système anti-torsion). Améliore l'adaptation dynamique d'au moins 15 % par rapport aux chaussures précédentes (torsion du milieu du pied et torsion du but). Fournit une meilleure absorption des forces dans la phase d'impact et la stabilité de l'empreinte, l'uniformité de l'empreinte et le contrôle de la pronation pendant la marche.
- Résistance à la déchirure : > ; 8 N/mm.
- Résistance à l'abrasion : < 150 mm3.
- Résistance aux hydrocarbures : < 12 %.
- Résistance à l'hydrolyse : < 6mm.
- Absorption d'énergie au talon : > ; 20 J
- Embout non métallique, avec une résistance aux chocs de 200 J ; conformément à la norme EN ISO 20345:2011 & ; EN ISO 12568:2010, extra last – large.
- Système de fermeture velcro.
Risks to protect
- Falling objects or crushing the ball of the foot.
- Falls and impact on the heel of the foot.
- Slip falls.
- Gliding on wet or oily surfaces.
- Injuries to the fingers or deformities in the feet.
- Muscular fatigue caused by walking or standing.
- Works that cause vibrations.
- Possible ankle sprains or strains.
- Accumulation of electrostatic charges generated by the movement or leaks of low voltage machinery.
- Very extreme heat conditions with a high need for perspiration.
- Protection against dust or dirt.
- Water penetration through the instep due to sporadic or permanent exposure to moisture.
APPLICATIONS OF THE JUNIPER BLACK VELCRO SHOE S2
- Industry and construction.
- Maintenance and welding.
- Outside and inside work.
- Warehouses.
- Transportation.
- Cleaning.
- Size 36
- Size 37
- Size 38
- Size 39
- SIZE 40
- Size 41
- Size 42
- Size 43
- Size 44
- Size 45
- Size 46
- Size 47
- Size 48
- Size 49